Rear Drum Brake ServiceSteps

NOTES, WARNINGS, AND HINTS
Fundamentals and Basics
PARTS REMINDER LIST
Fundamentals and Basics
RECOMMENDED TOOLS
Tools and Equipment

PROCEDURES
1. Check for applicable Technical Service Bulletins (TSB).
2. Perform Initial Test Drive and Diagnosis By Symptom.
Testing and Inspection
3. Begin repairs, lift and support rear of vehicle, remove rear wheels and release the parking-brake.
4. Remove and Inspect drums, resurface or replace if necessary.
- Drum removal notes.
Fundamentals and Basics
- Drum Inspection.
Testing and Inspection
5. Clean and Inspect rear brake assembly.
Testing and Inspection
6. Remove brake-shoes.
Service and Repair
7. Replace backing-plate if necessary.
Service and Repair
8. Rebuild or replace wheel-cylinder if necessary.
Service and Repair
9. Install brake-shoes and drum.
10. Perform Brake Bleeding procedure.
11. Adjust parking-brake.
Adjustments
12. Install tire and wheel assembly.
13. Perform After Repairs Test Drive.
Testing and Inspection

ENVIRONMENTAL AND SAFETY CONCERNS
Technician Safety Information