Master Cylinder ServiceSteps

NOTES, WARNINGS, AND HINTS
Fundamentals and Basics
PARTS REMINDER LIST
Fundamentals and Basics
RECOMMENDED TOOLS
Tools and Equipment

PROCEDURES
1. Check for applicable Technical Service Bulletins (TSB).
2. Perform Initial Test Drive and Diagnosis By Symptom.
Testing and Inspection
3. Inspect master-cylinder.
Testing and Inspection
4. Remove master-cylinder.
Service and Repair
5. Rebuild or replace master-cylinder as necessary.
Service and Repair
6. Adjust master-cylinder pushrod.
Service and Repair
7. Bench bleed master-cylinder.
Fundamentals and Basics
8. Install master-cylinder and Adjust pedal height.
Service and Repair
9. Perform Brake Bleeding procedure (front and rear brakes).
10. Adjust rear brakes.
Adjustments
11. Install tire and wheel assembly.
12. Perform After Repairs Test Drive.
Testing and Inspection

ENVIRONMENTAL AND SAFETY CONCERNS
Technician Safety Information