Service Specifications *

COMPONENT UNIT: mm (in)

FRONT BALANCER SHAFT END PLAY
Standard (New) [1] 0.100 - 0.350 (0.0040 - 0.0138)

REAR BALANCER SHAFT END PLAY
Standard (New) [1] 0.060 - 0.180 (0.0024 - 0.0070)

NO.1 JOURNAL DIAMETER, FRONT
Standard (New) [1] 42.722 - 42.734 (1.6820 - 1.6824)

NO.1 JOURNAL DIAMETER, REAR
Standard (New) [1] 20.938 - 20.950 (0.8243 - 0.8248)

NO.2 JOURNAL DIAMETER
Standard (New) [1] 38.712 - 38.724 (1.5241 - 1.5246)

NO.3 JOURNAL DIAMETER
Standard (New) [1] 34.722 - 34.734 (1.3670 - 1.3675)

JOURNAL TAPER
Standard (New) [1] 0.005 (0.0002)

TOTAL RUNOUT
Standard (New) [1] 0.020 (0.0008)

NO.1 JOURNAL OIL CLEARANCE, FRONT
Standard (New) [1] 0.066 - 0.118 (0.0026 - 0.0046)

NO.1 JOURNAL OIL CLEARANCE, REAR
Standard (New) [1] 0.050 - 0.075 (0.0020 - 0.0030)

NO.2 JOURNAL OIL CLEARANCE
Standard (New) [1] 0.076 - 0.128 (0.0030 - 0.0050)

NO.3 JOURNAL OIL CLEARANCE
Standard (New) [1] 0.066 - 0.118 (0.0026 - 0.0046)


[1] Manufacturer does not provide Service Limits for this component.