Instrument Cluster / Carrier: Service and Repair

1. Disconnect battery ground cable.
2. Remove instrument panel lamp dimmer control switch and reactor/fog lamp switch from instrument panel.

Fig. 8 Instrument Cluster Bezel Removal:

3. Remove five attaching screws, then remove instrument cluster bezel from instrument cluster visor, Fig. 8.

Fig. 9 Gauge Visor Removal:

4. Remove instrument cluster visor attaching screws, then the visor, Fig. 9.
5. Remove instrument panel lower cover, disconnect electrical connectors and speedometer cable from instrument cluster.

Fig. 10 Instrument Cluster Removal:

6. Remove four screws attaching instrument cluster to instrument panel, then remove instrument cluster, Fig. 10.
7. Reverse procedure to install.