Instrument Cluster / Carrier: Service and Repair

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable.
3. Carefully pry hazard switch out of instrument panel.
4. Remove three instrument cluster bezel attaching screws.
5. Disconnect 4-P connector from instrument panel.
6. Remove four cluster attaching screws, then pull cluster rearward and disconnect speedometer cable and electrical connectors.
7. Reverse procedure to install.
8. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.