Using Digital Multimeter (KS-AHM-32-003)

DIAGNOSTIC TROUBLE CODE DETECTION USING DIGITAL MULTIMETER
1. Remove the right door sill molding.
2. Pull the carpet back to expose the Transmission Control Module (TCM).
3. Remove the Engine Control Module (ECM) cover mounting nuts and turn the TCM over.
4. Connect the wire harness to the Test Harness, and/or connect the Test Harness to the TCM according to the troubleshooting flowchart.

NOTE:
- Only the A and D terminals of the Test Harness are used for A/T troubleshooting.
- Unless otherwise noted, use only the Digital Multimeter, KS-AHM-32-003 or equivalent, for testing.