Air Bag(s) Arming and Disarming: Service and Repair

To prevent accidental airbag deployment, turn the ignition switch OFF, disconnect the negative battery cable, and wait three minutes before disconnecting any SRS connectors.




- Before disconnecting the SRS main harness (A) from the SRS unit, disconnect both airbags (C,D).
- Before disconnecting the cable reel 2P connector (B), disconnect the driver's airbag 2P connector (C).

1. Disconnect the negative battery cable, and wait at least three minutes.
2. Disconnect the airbag connector(s).

Driver's 2p Connector:

Driver's Side:
Remove the access panel from the steering wheel, then disconnect the driver's airbag 2P connector and cable reel 2P connector.

Passenger's 2p Connector:

Front Passenger's Side:
Remove the glove box, then disconnect the front passenger's airbag 2P connector and SRS main harness 2P connector.