Antitheft and Alarm Systems: Service and Repair

Immobilzer Receiver Removal & Installation

1. Remove the dashboard driver's lower cover.
2. Remove the steering column covers.
3. Remove the windshield wiper/washer switch assembly.
4. Disconnect the 3P connector from the immobilizer control unit.

Immobilizer Receiver Replacement:

5. Remove the screw from the immobilizer receiver, then remove the receiver from the ignition key cylinder. If necessary, disconnect the connector from the receiver.
6. Install in the reverse order of removal.

NOTE: As this harness serves as communication link, install it carefully.

7. After replacement, check the immobilizer system.