Countershaft, M/T

DIMENSIONS
Clearance Between 1st Gear And Thrust Washer
Standard 0.06-0.23 mm (0.002-0.009 inch)
Service Limit 0.23 mm (0.009 inch)

Thrust Washer Thickness
Standard 1.95-1.97 mm (0.077-0.078 inch)

1st Gear Thickness
Standard 32.95-33.00 mm (1.297-1.299 inch)

Clearance Between 2nd And 3rd Gears
Standard 0.01-0.15 mm (0.004-0.006 inch)
Service Limit 0.18 mm (0.007 inch)

Spacer Thickness
Standard 29.07-29.09 mm (1.144-1.145 inch)

2nd Gear Thickness
Standard 28.92-28.97 mm (1.139-1.141 inch)

TIGHTENING SPECIFICATIONS
Locknut (Tighten in 3 steps)
First 127 Nm (94 ft. lbs.)
Second Back Off to 0
Third 127 Nm (94 ft. lbs.)