Except 99-00 Sedan

NOTE:
- Inspect the gasket; replace it if it is distorted or stays compressed.
- After installing the taillights, run water over them to make sure they do not leak.

Outer Taillights ('96 - 00 models, except '99 - 00 Sedan):

1. Open the trunk lid/hatch.
2. Disconnect the 4P or 6P connector from the outer taillight.




3. Remove the four mounting nuts, then pull out the outer taillight.

Inner Taillights (Coupe '96 - 00 models/Sedan '96 - 98 models):

1. Open the trunk lid, then remove the access panel.
2. Disconnect the 4P connector from the inner taillight.

Coupe:

Sedan:

3. Remove the four [three] mounting nuts, then pull out the inner taillight.
[ ]: Sedan