Cylinder Head Assembly: Specifications

Tighten the cylinder head bolts in two steps. In the first step, tighten all bolts in sequence to about 29 Nm (3.0 kgs.cm, 22 ft.lbs.). In the final step, tighten in the same sequence to 83 Nm (8.5 kgs.cm, 61 ft.lbs.).







Intake Manifold Head Installation








Camshaft Installation Torque and Sequence

Main Bolt Torque Sequence:

Main Bearing Torque Sequence

Piston:

Piston and Connecting Rod Installation







Timing Components and Crankshaft Pulley

Flywheel (M/T) Torque:

Flywheel M/T

Driveplate (A/T) Torque:

Drive Plate A/T

Exhaust Manifold:

Exhaust Manifold and Shield

Oil Pump:

Oil Pump and Screen

Lower Engine:

Rear Main:

Engine Lubrication:

Engine Block