PCM/ECM - MIL ON/DTC P0128 Set
01-064September 11, 2001
Applies To: 2001 Accord L4 - See VEHICLES AFFECTED
MIL Comes On With DTC P0128
(Supersedes 01-064, dated August 7, 2001)
Updated information is shown by asterisks and black bars.
SYMPTOM
The MIL is on, and DTC P0128 (cooling system malfunction) is set.
PROBABLE CAUSE
.
CORRECTIVE ACTION
Replace the ECM/PCM with the improved part.
VEHICLES AFFECTED
PARTS INFORMATION
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Failed Part: P/N 37820-PAA-A53
H/C 6487516
Defect Code: 072
Contention Code: C99
Skill Level: Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1. Confirm the DTC with the PGM Tester.
* 2. Write down the audio system anti-theft code and the radio station presets.
3. Download the immobilizer codes from the ECM/PCM with the PGM Tester. Refer to "Rewriting a New ECM/PCM" in Service Bulletin 00-049, Immobilizer System (Type 2), filed under Body Electrical.
4. Disconnect the negative cable from the battery. *
5. Remove the ECM/PCM.
6. Write down the part number of the current ECM/PCM. The part number is on the label at the front of the ECM/PCM.
7. Match the part number you wrote down with the current ECM/PCM part number listed under PARTS INFORMATION, then get the correct replacement ECM/PCM.
8. Replace the ECM/PCM in the reverse order of removal.
* 9. Reconnect the negative cable to the battery.
10. Upload the immobilizer codes into the ECM/PCM with the PGM Tester. Refer to "Rewriting a New ECM/PCM" in Service Bulletin 00-049, Immobilizer System (Type 2), filed under Body Electrical.
11. Enter the radio anti-theft code and the radio station presets. Set the clock.*
Disclaimer