Mainshaft, M/T

Mainshaft	End play		Standard or new	0.11 - 0.18 mm
			Service limit	Adjust
	Diameter of ball bearing contact area (clutch housing side)		Standard or new	25.977 - 25.990 mm
			Service limit	25.92 mm
	Diameter of spacer collar contact area		Standard or new	28.992 - 29.005 mm
			Service limit	28.940 mm
	Diameter of needle bearing contact area		Standard or new	34.984 - 35.000 mm
			Service limit	34.93 mm
	Diameter of ball bearing contact area (transmission housing side)		Standard or new	25.987 - 26.000 mm
			Service limit	25.930 mm
	Runout		Standard or new	0.02 mm maximum
			Service limit	0.05 mm
Mainshaft 3rd and 4th gears	I.D.		Standard or new	39.009 - 39.025 mm
			Service limit	39.070 mm
	End play	3rd gear	Standard or new	0.06 - 0.21 mm
			Service limit	0.33 mm
		4th gear	Standard or new	0.06 - 0.19 mm
			Service limit	0.31 mm
	Thickness	3rd gear	Standard or new	27.92 - 27.97 mm
			Service limit	27.85 mm
		4th gear	Standard or new	27.02 - 27.07 mm
			Service limit	26.95 mm
Mainshaft 5th gear	I.D.		Standard or new	39.009 - 39.025 mm
			Service limit	39.070 mm
	End play		Standard or new	0.06 - 0.19 mm
			Service limit	0.31 mm
	Thickness		Standard or new	28.92 - 28.97 mm
			Service limit	28.85 mm
Mainshaft 4th and 5th gears spacer collar	I.D.		Standard or new	29.002 - 29.012 mm
			Service limit	29.060 mm
	O.D.		Standard or new	34.989 - 35.000 mm
			Service limit	34.930 mm
	Length	A	Standard or new	51.97 - 52.03 mm
		B	Standard or new	24.03 - 24.06 mm