Cowl: Service and Repair
Cowl Covers Replacement1. Remove the windshield wiper arms.
2. Remove the windshield side trim from both sides (see step 2 of Windshield Replacement).
3. Pull the hood rear seal (A) away from the cowl covers, then remove it, and using a clip remover, detach the clips (B) from the cowl covers. Take care not to scratch the cowl covers.
4. Detach the clips (C) by carefully pulling the passenger's cowl cover (D) upward, to release the hooks (E), and pull out the cover forward to release the hooks (F), then remove the cover. Take care not to scratch the body.
5. Detach the clips (C) by carefully pulling the driver's cowl cover (G) upward, and pull out the cover forward to release the hooks (H), then remove the cover. Take care not to scratch the body.
6. Install the covers in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Push the clip portions into place securely.
- Reinstall both windshield side trim properly (see step 26 of Windshield Replacement).