Exterior Moulding / Trim: Service and Repair

A-Pillar Corner Trim Replacement

Special Tools Required
KTC trim tool set SOJATP2014

NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Open the door.




2. Carefully insert a trim tool next to the upper clip, and detach the clip by prying on the A-pillar corner trim (A). Take care not to scratch the body and related parts.
3. Close the door half-way.




4. Pull the A-pillar corner trim (A) out to detach the lower clips, then remove the trim.
5. Replace any damaged clips.
6. Hold the trim up, and fit the clips into the holes in the body, then push on the trim until the clips snap into place.