Shift Lever Trim

Shift Lever Trim Removal/Installation

NOTE:
- Take care not to scratch the dashboard and related parts.
- Put on gloves to protect your hands.

1. Remove the glove box.




2. Remove the shift knob.




3. Using a ratchet wrench and an 11 inch extension (A) wrapped with a shop towel (B), carefully insert the extension through the glove box opening, and push the shift lever trim (C) from under the trim to release the clips (D) and hooks (E) of the left side.




4. Pull out the shift lever trim (A) by hand to release the remaining clips (B, C) and hooks (D), and disconnect the hazard warning switch connector (E), then remove the trim.
5. Install the trim in the reverse order of removal, and note these items.
- Make sure the hazard warning switch connector is plugged in properly.
- Push the clip and hook portions into place securely.