Power Mirror

Power Mirror Replacement

1. Lower the door glass fully.




2. Carefully pry out the mirror mount cover (A) by hand in the sequence shown. Disconnect the tweeter connector (B), and release the wire harness (C) from the hook (D).
3. Remove the door panel.




4. Disconnect the connector (A), and detach the harness clip (B). While holding the mirror (C), remove the nuts, then remove the mirror. Take care not to scratch the door.
5. Install the mirror in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly.
- Attach the harness clip.