Headlights (USA)
EXTERIOR LIGHTSHow the Headlights (USA) Circuit Works
Low Beams
The headlight relays receive battery voltage at all times. When you turn the headlight switch to the HEAD position with the dimmer switch in LOW, ground is applied through the BLU/RED wire to the coils of the headlight relays. The relays are then energized, applying battery voltage to the left and right high and low beam headlights through fuses 15 and 17. The low beam filaments come on because they are grounded. The high beams and indicator remain off because the dimmer switch and flash-to-pass switch interrupts their ground path.
High Beams
The headlight relays receive battery voltage at all times. When you turn the headlight switch to the HEAD position with the dimmer switch in HIGH, ground is applied through the BLU/RED wire to the coils of the headlight relays. The relays are then energized, applying battery voltage to the left and right high and low beam headlights through fuses 15 and 17. The high beam filaments and indicator come on because they are grounded through the dimmer switch.
Flash-to-Pass
When you hold the flash-to-pass switch in the ON position, ground is applied through the BLU/RED wire to the coils of the headlight relays. The relays are then energized, applying battery voltage to the left and right high and low beam headlights through fuses 15 and 17. The high beams and indicator come on because a path to ground is provided through the closed flash-to-pass switch.