Rear Window Wiper Motor
Rear Window Wiper Motor Replacement1. Open the hatch, and remove the hatch trim panel.
2. Remove the mounting nut (A), the wiper arm (B) and the special nut (C).
3. Disconnect the 4P connector (A), remove the three mounting bolts (B), then remove the rear window wiper motor (C).
4. Install in the reverse order of removal, and note these items.
- Apply multipurpose grease to the moving parts.
- Before reinstalling the wiper arm, turn the wiper switch ON, then turn OFF to return the wiper shaft to the park position.
- If necessary, replace any damaged clips.
- Check the wiper motor operation.