P2445

DTC P2445: Air Pump Malfunction : (2004 - 2005 models)

NOTE:
- Information marked with an asterisk (*) applies to 2000-2003 models.
- Information marked with double asterisk (**) applies to 2004-2005 models.
- Before you troubleshoot, record all freeze data and review the general troubleshooting information.

1. Reset the ECM.
2. Make sure the engine coolant temperature is over 32 degree F (0 degree C) and below 158 degree F (60 degree C) with a scan tool or the HDS.
3. Start the engine. While the air pump operates, let the engine idle without load (in neutral) per at least 10 seconds.
4. Check for a Temporary DTC with a scan tool or the HDS.

Is Temporary DTC P1410* (P2445)** indicated?

YES - Replace the air pump.

NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the air pump and the air pump relay.