B-Pillar Outer Weatherstrip

B-Pillar Outer Weatherstrip Replacement

NOTE:
- Take care not to scratch the body.
- Use a clip remover, to remove the clips.

1. Remove the B-pillar outer weatherstrip as shown.




2. Install the weatherstrip in the reverse order of removal, and note these items:
- Check for damaged or stress-whitened clips, and replace them with new ones.
- Push the clips into place securely.
- If the old weatherstrip will be reinstalled, scrape off all traces of old butyl tape, then clean the weatherstrip surface with alcohol. Attach new butyl tape into position.