Horn Switch: Testing and Inspection

Horn Switch Test

1. Remove the steering column upper and lower cover.




2. Disconnect the dashboard wire harness B 4P connector (A) from the cable reel (B).




3. Check for continuity between the cable reel No. 2 terminal and body ground in each switch position according to the table.

- If there is continuity, the horn switch is OK.
- If there is no continuity, go to step 4.

4. Remove the driver's airbag.




5. Check for continuity between the cable reel No. 2 terminal (A) and the horn switch positive terminal (B).

- If there is no continuity, replace the cable reel and check for proper operation.
- If there is continuity, replace the horn switch.