Low Fuel Lamp/Indicator: Testing and Inspection

Low Fuel Indicator Test

1. Do the gauge drive circuit check.
- If the low fuel indicator flashes, go to step 2.
- If the low fuel indicator does not flash, replace the gauge control module assembly.

2. '03-05 models:
Do multiplex integrated control system troubleshooting test mode A.

06-07 models:
Do the B-CAN system diagnosis Test Mode A troubleshooting.
- If any DTCs are indicated, go to the indicated DTC's troubleshooting.
- If no DTCs are indicated, go to step 3.

3. Do the fuel gauge sending unit test.