Front Suspension
Stabilizer Bar Replacement1. Raise the front of the vehicle, and support it with safety stands in the proper locations.
2. Remove the front wheels.
3. Disconnect both stabilizer links from the stabilizer bar.
4. Remove the flange bolts (A) and the bushing holders (B), then remove the bushings (C) and the stabilizer bar (D) from the front suspension subframe (E).
5. Install the stabilizer bar in the reverse order of removal, and note these items:
^ Note the right and left direction of the stabilizer bar.
^ Align the paint marks (F) on the stabilizer bar with the sides of the bushings.
^ Note the fore/aft direction of the bushing holders.
^ Refer to stabilizer link removal/installation to connect the stabilizer bar to the links.
^ Before installing the wheel, clean the mating surface of the brake disc and inside of the wheel.
^ Check the wheel alignment, and adjust it if necessary.