Brake Pedal Replacement
Brake Pedal Replacement1. Disconnect the brake pedal position switch connector (A).
2. Disconnect the brake pedal stroke sensor connector (B).
3. Remove the lock pin (C) and joint pin (D).
4. Remove the brake pedal bracket mounting bolt (E) and nuts (F).
5. Remove the brake pedal with bracket (G).
6. Install the brake pedal in the reverse order of removal.
NOTE: Make sure movement of the brake pedal and the brake pedal stroke sensor.
7. Do the brake pedal and brake pedal position switch adjustment. Adjustments
8. Do the sensor 0 (zero) position memorization. Memorizing 0 (Zero) Position