No Picture Is Displayed
No picture is displayedNOTE:
- Make sure that the correct DVD color and version are installed.
- Check any official Honda service website for more service information about the navigation system.
- For problems with the rearview camera, do the rearview camera does not come on or work properly troubleshooting.
- Check the connectors for poor connections or loose terminals.
- Before troubleshooting, make sure you have the navigation system anti-theft code.
1. Check the No. 23 (10 A) fuse in the under-hood fuse/relay box and No. 35 (7.5 A) fuse in the under-dash fuse/relay box, and reinstall the fuse if it is OK.
Is the fuse OK?
YES - Go to step 2.
NO - Replace the fuse and recheck.
2. Turn the ignition switch to ON (II).
3. Operate the radio and listen to the audio.
Can you hear the audio?
YES - Go to step 4.
NO - Refer to audio system troubleshooting. Index, Symptom Troubleshooting
4. Turn the ignition switch to LOCK (0).
5. Remove the navigation unit.
6. Measure the voltage between navigation unit connector A (17P) terminal No. 17 and body ground.
Is there battery voltage?
YES - Go to step 7.
NO - Repair open in the wire between the under-dash fuse/relay box and the navigation unit.
7. Turn the ignition switch to ON (II).
8. Measure the voltage between navigation unit connector A (17P) terminal No. 14 and body ground.
Is there battery voltage?
YES - Go to step 9.
NO - Repair open in the wire between the under-dash fuse/relay box and the navigation unit.
9. Measure the voltage between the navigation unit connector A (17P) terminal No. 9 and body ground, and between navigation unit connector C (12P) terminal No. 4 and body ground.
Is there less than 0.1 V?
YES - Replace the navigation unit.
NO - Repair open in the wire between the navigation unit and body ground (G504), (G505).