Driver's Dashboard Undercover Removal/Installation

Driver's Dashboard Undercover Removal/Installation

For Some Models

NOTE: Take care not to scratch the dashboard and related parts.

1. Remove the driver's dashboard undercover (A).
1. Turn the lock knob (B) 90°.
2. Gently pull down the rear edge to detach the clips.
3. Pull the cover away to release the pin (C) from the holder (D).






2. Install the cover in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.