26-22

VSA DTC Troubleshooting: 26-22

DTC 26-22: Lateral Acceleration Sensor Stuck

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Do the VSA sensor neutral position memorization. Programming and Relearning

4. Test-drive the vehicle. Drive the vehicle at 7 mph (10 km/h) or more.
NOTE: Drive the vehicle on the road, not on a lift.

5. Check for DTCs with the HDS.

Is DTC 26-22 indicated?
YES - Go to step 6.

NO - If any other DTCs are indicated, go to the indicated DTCs troubleshooting. If DTCs are not indicated, intermittent failure, the system is OK at this time.


6. Check the LATERAL ACCELERATION SENSOR and YAW RATE S in the VSA DATA LIST with the HDS.

Is 0 °/s indicated?
YES - Go to step 7.

NO - Replace the yaw rate-lateral acceleration sensor. Service and Repair


7. Test-drive the vehicle. Check the YAW RATE S in the VSA DATA LIST with the HDS while driving in corners.

Does the indicated value change?
YES - Intermittent failure, the system is OK at this time.

NO - Replace the yaw rate-lateral acceleration sensor. Service and Repair