Power Mirror Replacement (4-Door)

Power Mirror Replacement

4-door

1. Raise the door glass fully.

2. Remove these items:
- Door panel Front Door Panel Removal/Installation (4-Door)

- Plastic cover, as needed Service and Repair

3. Disconnect the connector (A), and detach the harness clip (B).






4. Remove the maintenance caps (A), and remove the nuts.






5. While holding the mirror (A), detach the clip (B), then remove the mirror, and pull the harness (C) out through the hole in the door. Take care not to scratch the door.

6. Install the mirror in the reverse order of removal, and make sure the connector is plugged in properly.