Power Mirror Actuator Test (4-Door)

Power Mirror Actuator Test

4-door

1. Remove the door panel. Front Door Panel Removal/Installation (4-Door)

2. Disconnect the 3P (or 6P)* connector (A) from the power mirror actuator (B).
*: With power mirror defogger






3. Check actuator operation by connecting power and ground according to the table.

4. If the mirror fails to work properly, replace the mirror actuator.






Defogger Test

5. Check for continuity between terminals No. 1 and No. 3 of the 6P connector. These should be continuity.

6. If the continuity is not as specified, check for:
- An open in the wire.

- A faulty mirror holder.