Manufacturer Code Charts: 1202

Navigation System DTC Troubleshooting: 1202

DTC 1202: DVD Low Temp

NOTE:

- Check the vehicle battery condition first.

- Before you troubleshoot, make sure to follow the general troubleshooting information. How to Troubleshoot the Navigation System (With Navigation)

- This code sets when the internal temperature of the ECU falls below -4 °F (-20 °C). The unit is designed to shut down to protect the ECU. This is usually caused by very cold exterior temperatures. Do the troubleshooting when the unit is within the allowable temperature range.

1. Check that the temperature is above -4 °F (-20 °C) in the passenger compartment.

2. Clear the hard error code. How to Troubleshoot the Navigation System (With Navigation)

3. Turn the ignition switch to LOCK (0), and then back to ON (II).

4. Check for the hard error code. How to Troubleshoot the Navigation System (With Navigation)

Is DTC 1202 indicated?
YES - Replace the audio-navigation unit. Audio-Navigation Unit Removal/Installation (With Navigation)

NO - Intermittent failure, the system is OK at this time. If the unit repeatedly comes back with the DTC, replace the audio-navigation unit.