Door Lock Actuator Test

Door Lock Actuator Test

Driver's Door

1. Remove the driver's door panel. Service and Repair

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

4. If the actuator does not operate as specified, replace it.






Front Passenger's Door

1. Remove the front passenger's door panel. Service and Repair

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

4. If the actuator does not operate as specified, replace it.






Left Rear Door

1. Remove the left rear door panel. Service and Repair

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

4. If the actuator does not operate as specified, replace it.






Right Rear Door

1. Remove the right rear door panel. Service and Repair

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

4. If the actuator does not operate as specified, replace it.