Set Speed Does Not Cancel (Engine Rpm Stays High) When The Clutch Pedal Is Pressed (M/T Model) (With Cruise Control M/T)

Set speed does not cancel (engine rpm stays high) when the clutch pedal is pressed (M/T model)

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Do the clutch pedal position switch test. Clutch Pedal Position Switch Test (With Cruise Control M/T)

3. Do the cruise control input test. Component Tests and General Diagnostics Test the clutch pedal position switch signal input.

Also check for:

- Short to ground on the PUR wire
- Faulty clutch pedal position switch