Manufacturer Code Charts: 64

VSA DTC Troubleshooting: 64

DTC 64: Sensor Power Voltage

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Test-drive the vehicle.
NOTE: Drive the vehicle on the road, not on a lift.

4. Check for DTCs with the HDS.

Is DTC 64 indicated?
YES - Check for loose terminals in the VSA modulator-control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit, Service and Repair and retest.

NO - The system is OK at this time.