Manufacturer Code Charts: 84

VSA DTC Troubleshooting: 84

DTC 84: VSA Sensor Neutral Position

1. Do the VSA sensor neutral position memorization. Programming and Relearning

2. Turn the ignition switch to ON (II).

3. Clear the DTC with the HDS.

4. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.

5. Check for DTCs with the HDS.

Is DTC 84 indicated?
YES - Check for loose terminals in the VSA modulator-control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit, Service and Repair and retest.

NO - The system is OK at this time.