Vehicle Does Not Accelerate Accordingly When The Resume/Accel Button Is Pressed

Vehicle does not accelerate accordingly when the resume/accel button is pressed

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Do the cruise control input test. Component Tests and General Diagnostics Test the cruise control resume/accel switch signal inputs.

3. Do the cruise control set/decel, resume/accel, cancel switch test. Cruise Control Set/Decel, Resume/Accel, Cancel Switch Test/Replacement

Also check for:

- Open circuit, loose or disconnected terminals: LT GRN/BLK wire