M/T Shift Arm Rod Assembly Disassembly/Reassembly

M/T Shift Arm Rod Assembly Disassembly/Reassembly

1. Remove the select return spring (B).

2. Remove the 5 x 25 spring pin (C) from shift arm A using a 5 mm pin driver, then remove the shift rod (D).

3. Remove shift arm A from the interlock (E).

4. Clean all the parts in solvent, dry them, and apply MTF to any contact surfaces.

5. Install shift arm A to the interlock.

6. Install the shift rod and a new 5 x 25 spring pin.

7. Install the select return spring.