Set Speed Does Not Resume When the Resume/Accel Button Is Pressed (Set Speed Temporarily Canceled by Pressing Clutch Pedal)

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the clutch pedal) (M/T model)


Check for PGM-FI DTCs Initial Inspection and Diagnostic Overview.

Check the clutch pedal position switch adjustment Adjustments.

Do the cruise control combination switch test Service and Repair.

Do the cruise control input test Cruise Control (ECM/PCM) Input Test (A/T). Test the resume/accel switch signal input. Test the clutch pedal position switch signal input.

Also check for

Open circuit, loose or disconnected terminals: LT BLU or GRY wire

Also check for

Faulty clutch pedal position switch