Shift Interlock Switch: Testing and Inspection

Park Pin Switch Test

Produced in USA models

1. Remove the center console Center Console Removal/Installation.

2. Disconnect the A/T gear position indicator panel light/park pin switch 6P connector (A) from the park pin switch (B).





3. Check for continuity between connector terminals No. 1 and No. 2.

- There should be continuity when the shift lever is moved out of P.
- There should be no continuity when the shift lever is moved to P.

4. If continuity is not as specified, replace the park pin switch Service and Repair.

Produced in Saitama models

1. Remove the center console Center Console Removal/Installation.

2. Disconnect the A/T gear position indicator panel light/park pin switch 6P connector (A) from the park pin switch (B).





3. Check for continuity between connector terminals No. 1 and No. 2.

- There should be no continuity when the shift lever is moved to P.
- There should be continuity when the shift lever is moved out of P.

4. In continuity is not as specified, replace the park pin switch Service and Repair.