Set Speed Does Not Resume When The Resume/Accel Button Is Pressed (With The Cruise Control Main Switch Turned On

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Reading and Clearing Diagnostic Trouble Codes

2. Check the brake pedal position switch adjustment. Adjustments

3. Do the cruise control combination switch test. Service and Repair

4. Do the cruise control input test. Cruise Control Input Test Test the cruise control resume/accel switch signal input. Test the brake pedal position switch signal input.

Also check for:

- Open circuit, loose or disconnected terminal: ORN
- Faulty brake pedal position switch