Shift Interlock: Service and Repair

A/T Shift Lock Stop/Shift Lock Stop Cushion Replacement

NOTE: Do not wipe off the special grease that is applied to the portion of the shift lever when you disassemble or assemble it.

1. Remove the shift lever assembly. A/T Shift Lever Removal

2. Release the shift lock solenoid lock (A), then remove the shift lock solenoid (B).






3. Remove the shift lock release (A), and release the spring (B).

4. Remove the shift lock stop (C) and the stop cushion (D), and replace the shift lock stop or the stop cushion.

5. Install the shift lock stop cushion on the shift lock stop.

6. Install the shift lock stop over the pin.

7. Install the shift lock release spring and the shift lock release.

8. Install the shift lock solenoid assembly by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop.

9. Route the shift lock solenoid harness in the guide.

10. Install the shift lever assembly. A/T Shift Lever Installation