Power Mirror Replacement (4-Door)

Power Mirror Replacement

4-door

NOTE: Take care not to scratch the door.

1. Remove these items:
- Door panel Front Door Panel Removal/Installation (4-Door)

- Plastic cover, as needed Service and Repair

2. Disconnect the power mirror connector (A), and detach the harness clip (B).






3. Remove the plug caps (A) and the nuts.






4. While holding the power mirror (A), release the hook (B), then remove the mirror, and pull out the harness (C) through the hole in the door.

5. Install the power mirror in the reverse order of removal, and note these items:
- If the clip is damaged or stress-whitened, replace it with a new one.

- Make sure the connector is plugged in properly.

- Make sure the power mirror operate properly.