Front Seat Frame Replacement - Passenger's Seat (4-Door)

Front Seat Frame Replacement - Passenger's Seat

Passenger's Seat - 4-door

SRS components are located in this area. Review the SRS component locations SRS Component Location Index (4-Door) and the precautions and procedures Service and Repair before doing repairs or service.

Do the front passenger's weight sensor initialization; with the HDS, Programming and Relearning without the HDS Programming and Relearning after front passenger's seat frame replacement.

NOTE:

- Put on gloves to protect your hands.

- Apply oil to the pivot area of the slide locks.

- Apply multipurpose grease to the sliding area of the seat tracks.

- If the side airbag has deployed, replace the seat frame and related parts with new ones. Service and Repair

1. Remove the front seat. Front Seat Removal/Installation

2. Remove these items:
- Front seat-back cover/pad Front Seat-Back Cover Replacement

- Front seat cushion cover/pad Front Seat Cushion Cover Replacement

- ODS unit ODS Unit Replacement

- Front seat belt buckle Front Seat Belt Replacement

3. Detach the clips, then remove the recline inner covers (A), and the side airbag module holder (B), from the seat frame (C).






4. Remove the bolts, and release the seat cushion springs (A) from the hooks (B), then remove the seat cushion frame (C).

5. Remove the seat weight sensors. Front Passengers Weight Sensor Replacement (4-Door)






6. If necessary, remove the bushing (A, B) from the seat frame (C).

7. Install the seat frame in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.

- Make sure the seat wiring harnesses are routed properly and are not pinched.

- Do the front passenger's weight sensor initialization; with the HDS, Programming and Relearning without the HDS, Programming and Relearning if you replace the ODS unit.