Set Speed Does Not Cancel (Engine RPM Stays High) When The Clutch Pedal Is Pressed

Set speed does not cancel (engine rpm stays high) when the clutch pedal is pressed

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Reading and Clearing Diagnostic Trouble Codes

2. Do the clutch pedal position switch test. Clutch Pedal Position Switch Test

3. Do the cruise control input test. Cruise Control Input Test Test the clutch pedal position switch signal input.

Also check for:

- Short to ground in the LT BLU wire
- Faulty clutch pedal position switch