Side Engine Mount Bracket Replacement

Side Engine Mount Bracket Replacement

1. Support the engine with a jack and a wood block under the oil pan.

2. Remove the upper torque rod.






3. Remove the ground cable (A), then remove the side engine mount bracket (B).

4. Install the side engine mount bracket, loosely tighten the new bolt and nut (C), then loosely tighten the bolt (D).

5. Install the ground cable.

6. Remove the air cleaner assembly. Service and Repair






7. Loosen the transmission mounting bolt and nuts (A).

8. Raise the vehicle on the lift.

9. Remove the splash shield. Engine Removal






10. Loosen the lower torque rod mounting bolt (A).






11. Loosen the front mount mounting bolt (A).

12. Lower the vehicle on the lift.






13. Tighten the side engine mount mounting bolts and nut.






14. Tighten the transmission mounting bolt and nuts.

15. Raise the vehicle on the lift.






16. Tighten the lower torque rod mounting bolt.

17. Lower the vehicle on the lift.

18. Install the air cleaner assembly. Service and Repair






19. Install the upper torque rod, then tighten the new upper torque rod mounting bolts in the numbered sequence shown.

20. Raise the vehicle on the lift.






21. Tighten the front mount mounting bolt.

22. Install the splash shield. Engine Installation