HVAC Control Unit Removal/Installation (With A/C)

HVAC Control Unit Removal/Installation

1. Remove the center panel.
- With navigation system

- '09-10 models Audio-Navigation Unit Removal/Installation (With Navigation)

- Without navigation system

- '09-10 models Audio Unit Removal/Installation (Without Navigation, With Audio)

2. Remove the dials (A), the self-tapping screws, and the HVAC control unit (B).

3. Install the control unit in the reverse order of removal. After installation, operate the various functions to make sure they work properly.

4. Run the self-diagnostic function to confirm that there are no problems in the system. Reading and Clearing Diagnostic Trouble Codes