Rear Stabilizer Bar Replacement

Rear Stabilizer Bar Replacement

1. Raise and support the vehicle. Service and Repair

2. Remove the rear wheels.

3. Disconnect both stabilizer links from the stabilizer bar. Rear Stabilizer Link Removal/Installation

4. Remove the flange bolts (A) and the bushing holders (B), then remove the bushings (C) and the stabilizer bar (D).
NOTE: During installation, align the paint marks (E) on the stabilizer bar with the sides of the bushings.






5. Replace the stabilizer bar bracket (A) if necessary.

6. Install the stabilizer bar in the reverse order of removal, and note these items:
- Note the right and left direction of the stabilizer bar.

- Refer to stabilizer link removal/installation to connect the stabilizer bar to the links. Rear Stabilizer Link Removal/Installation

- Before installing the wheel, clean the mating surfaces on the brake disc or the brake drum and inside of the wheel.