M/T Differential Oil Seal Replacement

M/T Differential Oil Seal Replacement

Special Tools Required

- Oil seal driver attachment, 52 x 55 mm 07NAD-P20A100
- Driver handle, 15 x 135L 07749-0010000
1. Remove the oil seal (A) from the transmission housing (B).
NOTE: Be careful not to damage the transmission housing while removing the oil seal.






2. Remove the oil seal (A) from the clutch housing (B).
NOTE: Be careful not to damage the clutch housing while removing the oil seal.






3. Install a new oil seal flush with the transmission housing using the 15 x 135L driver handle (A) and the 52 x 55 mm oil seal driver attachment (B).






4. Install a new oil seal flush with the clutch housing using the 15 x 135L driver handle (A) and the 52 x 55 mm oil seal driver attachment (B).