Trunk / Liftgate Latch: Service and Repair

Tailgate Latch Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the tailgate or the related parts.
- If the tailgate latch does not unlock by using the keyless entry transmitter or unlocking the driver's door lock, remove the maintenance lid (A) from the tailgate lower trim panel. Unlock the tailgate latch by turning the lock lever counterclockwise as shown. Open the tailgate by pulling the tailgate handle.





1. Remove the tailgate lower trim panel .

2. Disconnect the tailgate opener cable (A) from the tailgate latch (B). Take care not to kink the cable.





3. For some models: Disconnect the cylinder rod from the tailgate lock cylinder Service and Repair.

4. Disconnect the tailgate latch actuator connector (A) and the tailgate lock switch connector (B), and detach the clip (C), then remove the tailgate latch.





5. Remove the bolts, then pull out the tailgate latch (D) from the tailgate.

6. Install the tailgate latch in the reverse order of removal, and note these items:

- Make sure the connectors are plugged in properly and the handle cable is connected properly.
- Make sure the tailgate opens properly and locks securely.