Front Passenger's Power Window Motor Test

Front Passenger's Power Window Motor Test

1. Remove the front passenger's power window switch Passenger's Power Window Switch Replacement.

2. Test the motor in each direction by connecting battery power and ground to the front passenger's power window switch 5P connector (A) according to the table.









3. Remove the door panel Service and Repair.

4. Disconnect the 2P connector (A) from the front passenger's power window motor (B).






5. Check for continuity between front passenger's power window switch 5P connector terminals No. 2 and No. 5 and front passenger's power window motor 2P connector terminals No. 1 and No. 2 respectively. There should be continuity.









6. If the wire harness is OK, replace the front passenger's power window motor.